Skip to main content

AI Story · 2D Estimate AI

The AI reads the drawings. You approve the grid.

2D Estimate AI turns a set of vector PDF drawings into a member list and a 3D model. The lines in the PDF say where each member is; the AI says what it is. Then a person approves the grid before a single member is placed on it.

  1. AI reads every sheet
  2. You approve the grid
  3. AI proposes each member
  4. You check and lock them

Where AI works

4 places in 2D Estimate AI use AI. In every one, a person has the last word.

  1. AI Extraction

    Setup › AI Analyzer › Extract Grid

    Reads
    The rendered sheets of the drawing set: framing plans, elevations and column schedules, read together as one building.
    AI proposes
    The grid, then each column, beam, joist and brace with its profile and grade, placed on that grid. Every member carries the sheet it came from and a confidence.
    You decide
    You review and approve the grid before any member is extracted. Low-confidence members are flagged for review, and anything you edit or add is locked, so a new run never overwrites it.
  2. Geometry completion

    Inside Build model

    Reads
    The grids, bays and levels, and the members the geometry could not place on its own: a designation, a span, a grid reference, no end points.
    AI proposes
    Coordinates for those members, so they can join the 3D model.
    You decide
    A result with no length is rejected and the member stays incomplete, marked Not in 3D with what it needs. You can add its ends by picking them on the drawing.
  3. Suggest a fix

    Model View › Check model

    Reads
    One finding the rules could not settle, such as two members in the same place, with each member’s mark, section, length, weight and drawing.
    AI proposes
    Which of the two members to keep, and why.
    You decide
    The answer must be one of the members offered, and it is labelled AI, advisory. Nothing is applied: you open the member and make the change yourself.
  4. Ask

    Model View › Ask

    Reads
    Your question in plain language, answered from this project’s model data rather than from the AI’s memory.
    AI proposes
    An answer, a selection in the 3D view, or, if you allow edits, a described change.
    You decide
    It is read-only by default. With edits allowed, it describes each change and waits for you to say yes before it makes it.

What isn’t AI

Plain software that gives the same answer every time. We don’t call it AI.

  • Grid bubbles, grid lines and the scale
  • Member lines and beam end points
  • Joist, truss and brace classification
  • Placing members and building the 3D model
  • Tonnage from AISC design weights
  • Check model findings
  • IFC and Tekla export